When we are talking about the countless craft the one thing that gets on our mind is that are there any crafts or are there any procedures that can be used as a way so that the crafts that you have made can also be used by you too, well yes. Here we are going to tell you that how you can simply while sitting at home and getting rid of your boring time can make the use of the duct tape in order to create a cart that will surely tease up your sense all over too.
The making of any craft is very easy and when you know that you can also make the use of the craft on your own body then nothing can sound pretty better than that too, well here we are going to tell you that how you can simply make the use of your old boots and just add the little baling factor to them buy the help of the duct tape. Now there are so many different choices in the duct tape crafts but all of that pretty depends upon your own choice as there are many different patterns in the duct tape, but here we will be talking about the cheetah print as our craft is mainly based on that. So let me tell you that what you used to make the cheetah print boots for this winter.
Thing that you will need for DIY Duct Tape Cheetah Boots Tutorial:
A pair of the boots you can also reuse your old ones if you are willing to get rid of them.
A roll of the duct tape specially in the cheetah print the color is depending upon your choice.
This will how your boots will look before the makeover, but that is not too much far.
No first of all you will have to wipe of your boots with a cleaner or with a wet cloth so that there is no duct or any other particle resting upon your boots.
Now of the cloth was wet just dry them off also.
Now let us start covering the boots with the duct tape. Use the longer strips of the duct tape on the upper longer section of the boots.
Now while moving on the lower part of your boots you will have to keep this thing in your mind that first the upper section should be completed and afterwards you should move to the lower part too.
Now make sure that you use the smaller strips of the duct tape for the lower front part of your boots, like this shown in te picture.
First press the lower part of the duct tape on the boots and then move towards the upper section of the duct tape on the craft.
Now when you are done with one boot you can move towards making the other one. Likewise in the same manner, well you can also add some extra factor like as adding the bedazzled to the lower part of the boots but this choice totally depends upon you, here is the finished look.